Menu

play.labs-mc.com 0 PLAYERS ONLINE
Join Our Discord! 0 MEMBERS ONLINE

Addressing Both Brake Noise and Electromagnetic Noise

Leire

New Member
I am working in the field of stage machinery and have encountered a challenging noise issue.

I am using an integrated servo motor(OYOSTEPPER) for a theater stage lift. Since the audience is seated nearby, the operating noise must be kept below 45 dB, and there should be no high-frequency electromagnetic "whining" (whistle).

I have already implemented mechanical vibration damping; however, the sound of the brake engaging/disengaging during motor acceleration and deceleration, as well as the electromagnetic whine caused by the drive's PWM (pulse-width modulation), remain audible. Lowering the carrier frequency reduces the electromagnetic whine but increases noise from current ripple, while adding a buffer to the brake mechanism negatively impacts the system's response time.

Could anyone with experience in integrated servo systems for stage equipment offer advice on how to suppress both brake noise and electromagnetic noise simultaneously? Should I look into modifying the brake, or perhaps changing the modulation method of the servo drive?

Thank you.
 

Members online

No members online now.
Top